
Add to Cart
SMD3.2*2.5 32.768KHZ Low Frequency Crystal Oscillator 3225 1.8V Or 3.3V
product application
Some high-end products, such as industrial control products, high-speed communication products
product advantage
The new Tianyuan in R & D, design, manufacturing, marketing and service as a whole, have a hundred grade purification workshop. The international advanced automated production lines, special test equipment, the latest technology and professional and technical personnel; has been preparing for the new Tianyuan own industrial park, to further expand the research and production of the higher requirements of the product.
product features
Standard Environmental Condition:
Environmental Temperature:15℃~35℃
Humidity:45%~85%
Atmospheric pressure:86~106KPa
Operating Temperature Range:-20℃~70℃
Crystal Frequency & Resistance will be tested under the following conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Storage Temperature Range:-40℃~+85℃
Mechanical test:
The quartz crystal unit shall be subjected to normal atmospheric conditions for 1hr before being tested.
Dropping Test:
The Units are measured for its frequency and resistance in accordance with Table1 & without mechanical damage,after allowing the crystal to fall freely.
From 75 cm of height 3 times on the firmed wood.
Vibration Test:
The Units are measured for its frequency and resistance in accordance with Table 1&without mechanical damage afer subjectiong to 2hrs of vibration with 0.75mm amplitude with 10~55Hz frequency sweep 20 times.
Sealing Tightness:
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and reach 1×10-3Pa;
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in accordance with Table 1 after dipping into molten solder with the temperature of 320℃±10℃;For 3~4 secs and at a depth up to a point 2.0mm from the base root.
Product specification
Type | SMD3225 | |
Frequency Range(MHz) | 1MHZ to 128MHz | |
Frequency Tolerance(at25℃) | ±10PPm ,±20PPm at25℃+/-2℃ | |
Supply Voltage | 3.3V | |
Frequency Stability vs. Temp(FL-T) | ±10PPm,±20PPm ,±30PPm | |
Operating Temperature range | -20~+70℃ or -40~+85℃ | |
Storage Temperature range | -45~+80℃ | |
Temperature Characteristics | 30PPm at-40~+85℃ | |
Load Capacitance | 15 Pf or Serles | |
Aging | ±1 PPm/year | |
Insulation Resistance | 500MΩ(DC100V±15V) |
Dimension
4.1.5 Refluence examination
Frequency change:≤±5ppm
Test Circuit
Discharge Waveform
FAQ
Packing
Samples and technical support can be provided free of charge.